ELEJG Электрические технологии
Главная/Продукция/Arc Fault Detection Devices JGAFDD-63
Изображение 0
Изображение 1
Изображение 2
Изображение 3
Эскиз 0
Эскиз 1
Эскиз 2
Эскиз 3
Устройства обнаружения дуговых разрывов JGAFDD-63
Устройства обнаружения дуговых замыканий (AFDD): далее именуемые защитой, эффективно обнаруживают дугу повреждения в линии доступа, включая параллельную дугу повреждения и последовательную дугу повреждения, и когда дуга повреждения, вызывающая пожар, обнаруживается в линии, функция отключения питания может быть выполнена для достижения цели раннего предупреждения о пожаре. Устройство защиты от дуги короткого замыкания подходит для электрических цепей мощностью 10 кВт и ниже в промышленных и гражданских зданиях.
ТипJGAFDD-63
Текущие характеристики 63A (1~63A)
Рабочее напряжение AC230V
Введение
3 phase 4 wire over and under voltage protector

JGGQ-80/3P+N 3 phase 4 wire over and under voltage protector It is an upgrade from the ordinary type of product, product technical characteristics: low power consumption, long life, precise control, lack of phase protection, lack of zero line protection, maximum short-circuit limit current of 3000A, software control of humanization, and clear indication with Led light, the product is powered on for the first time under normal conditions of power supply closing time of 5 seconds, when the line occurs undervoltage, lack of phase and other faults, when the power supply turns normal, the closing time is 20 seconds, this design saves too much time to wait when the power grid is out of power.

The three-phase four-wireSelf-resettable over/undervoltage protectorIt has the functions of phase loss, zero loss, overvoltage and undervoltage protection, and is often used in three-phase four-wire distribution lines and photovoltaic power generation combiner boxes.

The main technical parameters

1. Rated current: 32A, 40A, 50A, 63A, 80A

2. Working voltage: AC230V, 50Hz (phase line to neutral line working mode)

3. Overvoltage protection value: AC270V ±5V (phase to zero)

4. Undervoltage protection value: AC170V ±5V (phase to zero)

5. First power-on closing time: 5 seconds

6. Reset time after failure: 20 seconds

7. Action time: 0.1 seconds

8. The highest is possiblewithstandAC450V overvoltage(phase to zero)。

Implementation standards

 

The appearance of the size(3 phase 4 wire over and under voltage protector)
СВЯЖИТЕСЬ С НАМИ
Пишите нам по электронной почте с любыми вопросами и запросами или используйте наши контактные данные. Мы будем рады ответить на ваши вопросы.
Тема Устройства обнаружения дуговых разрывов JGAFDD-63
请在浏览器中启用JavaScript来完成此表单。
Сопутствующие товары
×

Оставить сообщение

请在浏览器中启用JavaScript来完成此表单。

Оставить сообщение

请在浏览器中启用JavaScript来完成此表单。

Получите решение для лазерного оборудования

请在浏览器中启用JavaScript来完成此表单。